fedex material handling

fedex material handling Paper details: make in simple English, with text citation on every paragraph. and please make sure there is no plagiarism. Report Guide-Lines Materials Handling Technology LOG 2203 Section: CGM & CGI Spring Semester 2015 . Students are required to submit a report regarding specific topic / Issue / Obstacle / Case study/ or Materials handling technology applied in the UAE or any other Gulf Countries. As presented in the course syllabus, this report is worth 20% of your final grade for the course. The Report should be in the range (20 -25 pages), Hard copy & Soft Copy to be submitted to the instructor. . Make sure that the title and ALL sub contents of the project are approved by the instructor prior your initial work on the project. . Font size 12 is required to use beyond the cover page and the table of content page. Spacing between lines should not be more than 1.5 is required, except for headings or titles. Locate references in the text as needed, and use the brackets to indicate these references. Labe all the figures, and graphs, don’t present any figures without elaborating on it in your report. A Safe Assign software will be used to check your report, No direct copying is allowed, (Copy and paste from any source). You must use own English. If you are directly copying from any source, and exceeding 25% which will be identified by the Safe Assign software, your report will be rejected with zero grade . Guide-lines for the report content A cover page, with all important details (Institution, Course #, Course Title, section, date of submission, …etc.) 1- Table of content page 2- Abstract 3- Introduction to the topic 4- Reasoning behind choosing your project. 5- Literature review , or any suitable material 6- Description of the project, specifications, details…etc. (This section might include many sub titles) 7- Available data and information including figure and pictures from site if available 8- Design categories 10- Benefits of the implementation of the chosen project 11-Any further information that could enhance your report 12- Results and conclusion 13-References 14- Appendix Example on references inside the body of the report: Force is usually equal to the mass of the object multiplied by acceleration acting on it (1). This formula might be changed in the general form depending on the application, but the content and the principle applies to all cases, as a result, since you changed in the statement, but still not your idea, you need to provide a reference at the end of the paragraph as shown: ----------------------------------------- (1) And in the references page number 1 reference Must be the one mentioned above. If you are directly quoting from a source you should use the brackets” such as : “ --------------------------- ” (2) In the reference page be consistent by using only one form reference style for your materials.