LAB:CDMA Simulation Using MATLAB This program models a simple implementation of CDMA technology. It considers 20 bit data streams sent by 3 senders across a common channel. Each sender uses a unique code word, given by the Walsh set, to encode its data, send it across the channel, and then perfectly reconstruct the data at 3 receivers. The simulation utilizes these simplifications: 1. The individual data streams share the same bit length. 2. The code words are determined using the Walsh set to create orthogonal code words. 3. The "spreading factor" M of each code word is identical. 4. All users (data streams and codes) are synchronized in time. 5. Set-up and hold times of real-world systems are ignored. 6. The channel through which the data passes is ideal. I- Use the Matlab script provided as m-File. II- Record the results, 2 passes. III- First pass Second pass The bit # 1 is from Station A The bit # 2 is from Station C The bit # 3 is from Station A The bit # 4 is from Station B The bit # 5 is from Station A The bit # 6 is from Station B The bit # 7 is from Station A The bit # 8 is from Station B The bit # 9 is from Station C The bit # 10 is from Station C The bit # 11 is from Station B The bit # 12 is from Station A The bit # 13 is from Station A The bit # 14 is from Station C The bit # 15 is from Station A The bit # 16 is from Station C The bit # 17 is from Station B The bit # 18 is from Station C The bit # 19 is from Station A The bit # 20 is from Station B>> The bit # 1 is from Station C The bit # 2 is from Station A The bit # 3 is from Station B The bit # 4 is from Station C The bit # 5 is from Station C The bit # 6 is from Station C The bit # 7 is from Station B The bit # 8 is from Station A The bit # 9 is from Station A The bit # 10 is from Station A The bit # 11 is from Station C The bit # 12 is from Station A The bit # 13 is from Station C The bit # 14 is from Station A The bit # 15 is from Station C The bit # 16 is from Station B The bit # 17 is from Station A The bit # 18 is from Station A The bit # 19 is from Station B The bit # 20 is from Station B>> III. Verify one case manually. IV. Try to understand how the script works. v. Write a report.